Additive manufacturing (AM) offers new manufacturing solutions for the integration of smart functionalities in engineering structures. In this paper, an analytical model is presented for an embedded load sensing element based on a liquid-filled capillary. During the additive manufacturing process, the capillary is integrated in the region where the strain is to be determined. The embedded capillary deforms as the structure deforms under an applied load, as such altering the pressure inside the capillary. The monitoring of the capillary pressure allows monitoring the loads and thus usage of the component. This paper presents a model describing the behavior of the sensing element under uniform tensile stress. The sensitivity of the load sensing element per unit longitudinal strain depends on the bulk modulus of the liquid inside the capillary and the Poisson coefficient of the surrounding material. The current work further compares the analytical model against static tension-compression tests of powder bed fused stainless steel (AISI 316L) test specimen with an integrated capillary filled with a liquid (water). Similarly, the validation of the model is then checked against a dynamic four-point bending test on a Ti-6Al-4V specimen produced by powder bed fusion.

Original languageEnglish
Pages (from-to)9447-9455
JournalIEEE Sensors Journal
Volume19
Issue number20
DOIs
Publication statusPublished - 15 Oct 2019

    Research areas

  • Additive manufacturing, embedded load sensing, usage monitoring, structural health monitoring, effective structural health monitoring

ID: 47859050